Western Delight

Tutorial by

Jcuttlebear01 aka JoAnn

5/18/2011

I do these for fun and as a learning tool.

I don't sell or make a profit from any of the

supplies I have collected. Or from writhing these tutorials.

I don't claim to have done any of the graphics

and that, just the tags I make and share.

Some knowledge of psp is most helpful.

I used psp 9 any will work.

Scrap kit I used is the wonderful work

of Wicked Princess and Its called

Yee Haw Baby! Tagger *EXCLUSIVE* and its on sale right now.

HERE

Supplies

Tube of choice

Font of choice

Graphic of choice

HERE

Remember to save often in case

your psp freezes up, so you don't have

to start all over.

Open template and duplicate>close original.

Delete Raster 1>also Frame 1 and 2,

And Frame background for 1 and 2.

I'm not using them in this tutorial.

Once you have done that, this is what

you should have in your layer pallet.

Image canvas size, we will resize when done.

But this will give you lots of room to add things.

Select bottom layer in your layer pallet>Magic wand

Settings>

The reason for giving it a feather, is it gives you smooth edges.

Pick a paper from the kit>I used>WP_RAC_PP10

Copy and paste as a new layer>resize

NOTE

The next few steps will be the same with all the template layers

unless I state other wise.

With mover tool move it over until it's like you want it.

It will not fill the whole space don't worry about that,

you will not see it. Selection>invert and delete.

Deselect.

Add drop shadow>to each of the paper layers.

Delete rectangle 1

Select Rectangle 2 and repeat above steps

but use a different paper

WP_RAC_PP1

Deselect

Select Rectangle 3 and repeat above steps

use a different paper

WP_RAC_PP6

Deselect

Select Rectangle 4 and repeat above steps.

use a different paper>WP_RAC_PP2

Deselect

Select Bracket layer

Use a different paper

WP_RAC_PP5

Deselect

This is where I'm at so far.

Select the gray square

Change settings for magic wand to 0 feather and 0 tolerance.

Click inside the frame>you can delete the gray background layer

if you wish. I did>add a new raster layer>selection>modify>expand>

by 3>copy and paste into selection graphic of choice.

Deselect

Select the square frame>selection>expand by 3.

I wanted the frame a little bit larger.

Copy and paste as a new layer paper of choice.

WP_RAC_PP2

Resize as before and move how you want it.

Selection>invert and delete.

Keep Selected

Selection>invert and give you frame a nice inner bevel.

Deselect>give it the same drop shadow as before.

You are all done with the template now.

Lets add some accents.

Open and copy and paste as a new layer>

WP_RAC_CACTI

Resize by 60 percent

Don't worry about arranging right now on the cacti.

Open and copy and paste as a new layer>

WP_RAC_CACTI2.png

Resize by 45 percent

Move the two close together>

I took and turned the one a bit.

When your happy with the way it looks

Make sure your on the right layer

and merge down.

I moved the one below the other.

Then image mirror.

Add drop shadow same as before.

Duplicate this twice.

On the original>layer arrange and send to bottom

With mover tool move how you want it.

On the next one image mirror> arrange and sent to bottom.

and move it over to the left side.

Resize by 80 percent and with deform tool turn it a bit.

It's up to you how you want it.

On the last copy of this layer

Resize by 70 percent leave on top.

With deform tool move and turn how you want it.

Close off your top cacti tube and merge all the other layers.

Reopen it.

Move the layers over so you have room on the left side to add this

next step.

Poster Layer

Open the wanted poster

WP_RAC_POSTER

Find the man tube you wish to use.

With selection tool draw around the inside of the frame

Add new raster layer>copy and past it into the selection.

Deselect>add drop shadow.

Change settings to

Merge layers

Add words you wish to on this.

Merge all layers

Resize by>50 percent>adjust sharpen.

Copy and paste as a new layer to your working image.

With deform tool turn and move it how you want it to look.

Copy and paste as a new layer

WP_RAC_SADDLEDHORSE

resize by 30 percent.

Add Drop shadow, and move where you like it.

Copy and paste as a new layer

WP_RAC_ANIMALSKULL

Resize by 30 percent>add drop shadow

move to the center of you frame.

Copy and paste as a new layer

WP_RAC_WHEEL

Resize by 30 percent make sure its your

top layer.

With mover tool, arrange where you want it.

Add drop shadow.

Add milk can>resize by 20 percent.

WP_RAC_MILKCAN

Add drop shadow, and move how you want it.

Add>WP_RAC_BARREL>resize by 40 percent

add drop shadow.

Move where you want it.

Add tube of choice>I added the lady tube

and resized her by 40 percent>moved how

I wanted her and gave a drop shadow.

Add any other tubes you wish to at this time.

When done and happy with everything merge

all layers.

Resize the graphic down to 600 width

the other will change on its own.

With crop tool remove part of the extra around the

tag you just made.

Leave enough room for the mask.

Selection>all>new raster layer>

either flood fill with a color from your tag, a light color for the

foreground, and add another layer and add a dark color for the

background.

I used>#b18048 for the background color>and paper 1

for the bottom layer.

Layer>mask from layers>from image>

Merge group layer.

Add a drop shadow.

If your happy with it, merge all layers.

Add a 1 pixel border>color of choice.

Add a 10 pixel border a dark color.

Add your water mark and any thing else at this time.

Resize to your liking.

Would love to see what you do with this.

Thank you for giving my tutorial a try.

I do hope you have enjoyed this tutorial, and learned

something new.

Have any questions or need help.

Just let me know, I'm always happy to help any way I can.

Jcuttlebear01@aol.com

Thank you Mary

This one below is by me

Tiger Delight

Tutorial by

Jcuttlebear01 aka JoAnn

5/11/2011

I do these for fun and as a learning tool.

I don't sell or make a profit from any of the

supplies I have collected. Or from writhing these tutorials.

I don't claim to have done any of the graphics

and that, just the tags I make and share.

Some knowledge of psp is most helpful.

I used psp 9 any will work.

Supplies

3 graphics of choice

Tube

Accents of choice

Font AR Decode

All supplies I used are HERE

Plug ins

Xero HERE

Filters unlimited HERE

Alien Skins Xenofex 2 HERE

AAA frame HERE

open a new image 500 X 800

will resize when done

Selection tool>draw out a square

I went about 7 gray squares by 7 gray squares.

any where on your new image.

Selection>modify>select, selection border

 use a color or a gold patter for the frame.

It's all up to you>I used gold beads

set at angel 0 and size 200

 duplicate move down so it touches the first one

duplicate it again and move it down with you mover tool.

they should all be lined up now.

 Merge visible layers.

With your mover tool>move it over so you have lots

of room to work.

Top>magic wand and modify expand by 3

Layer new raster layer>copy and paste into

selection the first graphic you want to use.

Layer arrange move down.

Deselect

Repeat the above step for all 3 of the frames.

Just make sure your on the right frame layer each time.

When your all done with the frame, and are happy

with how it looks>merge all layers

This is what I have so far.

Now we will add some leaves to the frame,

Copy and paste as a new layer>Leaves 1

Resize by 50 percent>with mover tool move over to the right side

of the frame and layer arrange move down. 

Duplicate the leaves>image flip and place them

how you want them at the bottom of your frames.

Duplicate and move that layer up to the middle.

I took my eraser tool and did away with

a couple of leaves I didn't want there. 

 Once you have them placed close off the frame>

and merge visible.

Give them a drop shadow.

Layer duplicate>mirror image.

I then took my free hand selection tool and

went around the leaf tube and just took a couple

and copied and pasted as a new layer

Resize the by 45 percent. and kind of fill in

where you think they need to be.

I closed off the layers so you could see how I placed them.

Be sure and add the same drop shadow.

I now took and added the same leaves

on the top of the frame.

Resized them by 40 percent.

Add the drop shadow and arrange them.

 This is what I have now.

If your happy with the way it all looks

Then merge all layers.

Pick a nice color you want for the back ground.

I used>#e1c798

Add a new raster layer>arrange and move it down.

Flood fill with color of choice.

Effects>plug in Alien Skins Xenofex 2 burnt edges.

Settings I used, you can mess around and see if you

like something better.

 With mover tool>arrange your frame and that in the center of this.

Add a new raster layer arrange and send to the bottom.

Flood fill with a nice dark color>#89554a

Selection>select all>modify>contract by 25

Effects>plug ins>AAA photo frame>

 Keep selected>selection>modify>select border

Flood fill with the gold pattern you used on your frame.

Deselect

On the same layer>magic wand and select the outside part of the frame.

Flood fill with the light color>effects>texture effects>blinds

Keep selected

Effects>plug in>filters unlimited>glass frame 1

settings>20>and 70

Depends on how you want it to look.

Deselect

Add the tube you wish to use.

Add same drop shadow as before.

Merge all layers

Effects>plug in Xero>Porcelain

you can play around with the settings but this

is the ones I used.

Add a new layer>add your water mark and now your done.

Resize to your liking.

Would love to see what you do with this.

Thank you for giving my tutorial a try.

I do hope you have enjoyed this tutorial, and learned

something new.

Have any questions or need help.

Just let me know, I'm always happy to help any way I can.

Jcuttlebear01@aol.com

Another example by me

Thank you for giving this a try.

DreamsRmaid

 Thank you Mary

Thank you Wendy

You Rock Babe

Tutorial by Jcuttlebear01 aka JoAnn

5/2/2011

I do these tutorials for fun and not

for any profit. I use them also as a learning tool to

help others learn the fun and art of paint shop pro.

All things I use are collected, the only thing I claim

Is the tag I make with these as my work.

This tutorial is written with the idea you

have some knowledge of PSP.

This was done in PSP 9 but should work with any.

Supplies:

Tube of choice

Font of choice

All I used are HERE

Plug-Ins

AAA frames texture HERE

Penta dot and cross HERE

Filters Unlimited HERE

Open new image 800 X 700

We will resize later.

Open the tube you wish to use, and

pick a light color for the foreground #e6c57f

and a dark color for the background. #924527

Minimize the tube in PSP for now.

Take your preset shape tool set to the settings below.

Letter G in your preset shapes>it's in the supplies if you

don't have it>place in your preset shapes folder.

NOTE

I have made a template that you can use

in psp 7 that is in the supplies.

If you can't get the preset to work.

Draw out a frame large, we will resize when we are all done.

Layer convert to raster.

Magic wand and click on the dark part of the frame

AAA frames texture effects>

Deselect

Select in the brown area once again and>

Effects>plug in penta dot and cross>use default settings.

Deselect

Change your preset shape to oval and draw a circle in the middle of your frame.

Change the background color, to a color of choice.

I used #d8d4c9

Convert to raster layer

Click on the inside of the circle>selection modify and contract by 25

new raster layer copy and paste into selection the record.

Deselect

Add a drop shadow

Make sure your on the top layer>merge down.

Preset tool>and go rectangle shape>set the width

at 5

Highlight layer 2 in the layer pallet>draw out a rectangle

Don't make it to large. Layer>convert to raster>

click on the inside of it.

Effects>blind effects

Deselect

Select the frame around it>effects>texture>

you can use a texture of choice, this is what I did.

This is what I have so far.

Repeat the step above but change the colors

on the blinds change it to light from top, so

it runs the other way.

Select small frame around the edge of this one,

add another texture.

Deselect

Now draw another rectangle up and down this time,

change colors>move it how you want it.

Layer duplicate and mirror>Leave that one

alone for now.

Convert to raster layer

Go back to the one on the left side and select inside

I used filters unlimited paper background>fabrous paper fine

with default setting and give it a texture.

Select>

Then I gave it filters unlimited

Glass frame 2>change frame size to 35

Deselect>select on the inside of this one

filters unlimited>paper background one of choice>I

used canvas nature coarse.

Deselect

This is what we have now.

I took my deform tool and moved and pulled down on

the ones we just made, not to much.

Take your selection tool and cut out, so the side ones

look like they kind of weave>if it helps take and lower

the occupancy down so you can see where you are at.

Make sure your on the right layer.

Do the same with the other side, but at the top.

Go back to the bottom frame and select it>selection modify expand by 5

add a new raster layer.

Add a background of choice.

flood fill #63390f is what I used.

layer arrange and move down.

Deselect

If your happy with the way things look now

you can add any accents you wish to at this time.

I added a branch and resized it by 50 percent

added a drop shadow>2, 2, 75 and 7 color black

Took deform tool and turned it how you want it.

Add the notes bar resize as needed.

Add a drop shadow.

Add the little guys with music instruments, and the others

resize as needed and place them where you want them.

Add your wording, and any thing else you wish to at this time.

Add your tube of choice and resize as needed, add drop shadow.

If your happy with every thing merge all layers.

Select all>invert>image>crop to selection.

It will get rid of all the extra empty back ground.

Image>add border 10 pixel background color.

Add your water mark and resize as you wish, we

are all done.

Your ready to save and share your work of art.

Would love to see what you do with this.

Thank you for giving my tutorial a try.

I do hope you have enjoyed this tutorial, and learned

something new.

Have any questions or need help.

Just let me know, I'm always happy to help any way I can.
Jcuttlebear01@aol.com

Another I did

Thank you Mary.

Thank you Jessica

Thank you Wendy

Vacation Time

Tutorial by Jcuttlebear01 aka JoAnn

                                  4/20/2011                                      

I do these tutorials for fun and not

for any profit. I use them also as a learning tool to

help others learn the fun and art of paint shop pro.

All things I use are collected, the only thing I claim

Is the tag I make with these as my work.

This tutorial is written with the idea you

have some knowledge of PSP.

This was done in PSP 9 but should work with any.

I'm using this great kit called Going deep.

by Wicked Princess

it's a FTU one and you can find it HERE
Can't find on her site kit is HERE  (Dropbox)

Supplies:

Tube of choice~Tube I used is by Anna BR.
She share her tubes HERE

Font of choice I used is called~AmerikaSans

Graphic of choice

All that I used is HERE (4 share) or
HERE (drop box)

No plug ins used for this tag.

Open new image 800 X 700

We will resize later.

1. Open the frame>WP_GD_SOSLIFESAVER

from the kit and resize by 80 percent.

2. Magic wand and click inside the frame.

Selection>modify expand by 6>new raster layer>

and copy and paste into selection the graphic or the

paper you wish to use.

3. Layer arrange and move down.

Deselect

4. You can colorize the frame to go with your back ground if

you would like to.

5. We will now start adding some accents.

Copy and paste the tube of your choice.

I'm using a nice one by Anna Br.

Resize by 60 percent, and move to the right.

Then I took the eraser tool and put it like she was inside the frame.

 

6. Add a drop shadow

7. Add from the kit WP_GD_BARREL resize 40 percent,

and copy and paste as a new layer. Move over to the

right by the lady. Add same drop shadow.

8. Add from the kit WP_GD_PALMTREE resize by 55 percent>

take deform tool and turn how you would like it to look.

Then I took the eraser tool and did away with what I didn't want.

9. The tree should still be in your memory so just paste it

once again to your work.

Resize this one by 40 percent.

10. Activate your large tree and duplicate>mirror

move it down under the lady tube.

Take your deform tool and move it around how you would like it.

Once you have all 3 trees place give them the same drop shadow.

11. Add WP_GD_BOAT resize by 30 percent>move over to the left.

Add drop shadow.

12. Add WP_GD_FENCE resize by 30 percent move over by the

boat and add drop shadow.

13. Add some sea shells of choice.

I resized the ones in the kit, by 20 percent and moved them to the left.

I took the deform tool and turned them and moved them like I wanted.

Add a drop shadow to each one.

This is what I have so far.

14. I then added the drift wood. Resized by 45 percent.

Move it over by the sea shells.

15. I took the mesh warp tool and pulled and turned the wood,

so it didn't look so straight. It's up to you.

Add drop shadow.

Bring a couple of the sea shells up to the top>so they are

or the wood.

16. Add WP_GD_BIRD2 from the kit resize by 20 percent.

Duplicate mirror and set them on the wood.

Duplicate the mirrored one again and place on the barrel.

You can give each of them a drop shadow.

17. If your happy with everything merge all layers.

Add a new raster layer and flood fill with color of choice.

We will add the mask WSL_mask 99.

Merge group

18. I resized the mask by 90 percent.

I add the same drop shadow, but changed the color to a light blue.

Merge all layers>resize by 90 percent>crop off extra you don't want.

Add your watermark and your name at this time.

You are now ready to save your work of art.

Would love to see what you do with this.

Thank you for giving my tutorial a try.

I do hope you have enjoyed this tutorial, and learned

something new.

Have any questions or need help.

Just let me know, I'm always happy to help any way I can.

Jcuttlebear01@aol.com

Thank you Mary for testing it out for me.

 

Thank you

DreamsRmaid for giving my tut a try.

Peep and Friends

Tutorial by

Jcuttlebear01 aka JoAnn

4/13/2011

I do these for fun and as a learning tool.

I don't sell or make a profit from any of the

supplies I have collected. Or from writhing these tutorials.

I don't claim to have done any of the graphics and that, just the tags

I make and share.

Some knowledge of psp is most helpful.

I used psp 9 any will work.

I'm using the awesome kit from Wicked Princess aka Shani

you can find this darling kit New! Lil Bo Peepers PTU Exclusive

If you can't click on the link then use this:

http://designerscraps.com/index.php?main_page=index&manufacturers_id=22&zenid=849c97388b42a414c622bcd7b803342d
This kit is on sale right now.

Tube I'm using is from Gary Rudisill and you can

I can't supply it cause its a PTU tube

find it HERE

Template I used is from the great work of Melissa

I used #83 and you can find it here

http://melissazcreationz.blogspot.com/search/label/Templates

The little sheep I used are from

http://randyssin.blogspot.com/

Font of choice:

Ones I used are in the supplies

Supplies

HERE

Open the template

and duplicate it and close the original.

delete layer 1

Image>Canvas Size so you have  room to work, we will resize later on.

In the layer pallet start with raster 10

Highlight>select with magic wand tool

and change feather to 5

It gives your work a smoother look.

Now copy and paste a paper of choice from the kit>

I'm using WP_LBP_PP3

Resize by 60 percent copy and past as a new layer>

Take your mover tool and move it how you want it.

Selection>invert>delete>

Deselect

Delete layer 10

In layer palette click highlight layer 3

Magic wand and change the feather back to 0

Find a paper> I'm using WP_LBP_PP10

resize by 60 percent.

copy and paste as a new layer.

Selection invert and delete.

Deselect

Delete raster 3

In layer palette click highlight layer 9

Magic wand and select it>Find a paper>

I'm using WP_LBP_PP4> resize by 60 percent.

copy and paste as a new layer.

Selection invert and delete.

Deselect

Delete raster 9

In layer palette click highlight layer 8

Magic wand change the feather back to 0>

and select it>Find a paper>

I'm using WP_LBP_PP6

resize by 60 percent.

copy and paste into selection.

Deselect

Add a drop shadow



 In layer palette click highlight layer 2

Magic wand and select it>you can

use the same paper for all the frames if you wish.

Or find another you want to use, it's all up to you.

Deselect

Add a drop shadow same as before.

Layer palette highlight copy of raster 9>

Magic wand and select it>Find a paper>

I'm using WP_LBP_PP14

resize by 60 percent.

copy and paste as a new layer.

Selection invert>delete

Deselect

Delete copy of layer 9

Copy of raster layer 8>do the same

as for the other frame you just did.

In layer palette click highlight layer 5

Magic wand and select it>Find a paper>

I'm using WP_LBP_PP7>resize by 60 percent.

copy and paste as a new layer.

Selection invert and delete.

Deselect

Delete raster 5

Raster 4 do the same as the other frames.

Raster layer 7>select all 3 squares.

Copy and paste as a new layer>paper of choice.

I'm using WP_LBP_PP5

move how you want it, depending on the

tube your using.

Selection invert and delete.

Deselect

Hide the background layer you just put in>

Click in the center of each of the squares again

and copy and paste your tube as a new layer.

Move how you want it, selection>invert>delete.

Deselect

Raster 6 you can do the same as the

other frames.

Note

If your not going to place any thing else inside the frames

go and highlight layer 2 and merge down, do the same with the rest

of those with frames.........this way you can move them and

arrange as you wish.

Now we will add some accents.

I add a couple little lambs

Resized them like I wanted

Gave them each a drop shadow.

Then added some grass

WP_LBP_GRASSFLOWERS

I didn't want the flowers on so

took eraser tool and removed them.

Then took WP_LBP_ROSEBRANCHES

Resized and took deform tool and turned how I liked.

Then played around with the mesh tool and pulled it around.

Add drop shadow when your happy with it.

Copy your main tube and resize and place where you want

Move any thing else and get it like you want.

Add a drop shadow to your tube.

This is how mine looks now.

If your happy with what you have then merge all layers

add a new layer>flood fill with color

you wish your mask to be.

Layer>new mask from image>and find

WSL-143 and hit ok.

Merge group

With deform tool you can move it in size like you want.

Crop any extra you don't want on your tag.

Add a new layer and place your watermark.

Merge all layers.

Resize to your liking.

After I resize I do adjust clarify to brighten it up.

Your now all done and ready to share your work of art.

Would love to see what you do with this.

Thank you for giving my tutorial a try.

I do hope you have enjoyed this tutorial, and learned

something new.

Have any questions or need help.

Just let me know, I'm always happy to help any way I can.
Jcuttlebear01@aol.com

Thank you Mary for testing my tutorial for me.